logo
  • PQX-15 Portable plate & pipe beveler beveling machine
  • Model Name:

    PQX-15 Portable plate & pipe beveler beveling machine

  • Product Description
  • This machine is a handy and flexible unit for the preparation of welding, beveling, deburring of materials, low weight (compared with our other similar machines) enables the use at almost every work place and a rattling-free, steady milling operation. 

Follow Us:

Precaution for operation

Please notice the position of groover. You should adopt different operating way according to position. If you want to put it on edge, you should fix machine in parallel direction and not make cutter head connect with work.(2/3 length of operating platform) Start machine and make milling work along arrow slowly.

If you want to grip it with works, you should fix it on left operating platform in case of touching work. Start machine and make milling work along arrow slowly until the length of machine on platform is beyond of total length. Then, you can make it work according to need.

Beveling of pipe

PQX-15 groover can do well on the beveling of flat plate and pipe. Before beveling pipe, you should equip beveling wheeled. Show as diagram. 

After equip wheeled, you should fix the pipe (put the shorter pipe vertically and put longer pipe horizontally). Put the groover on end of pipe and adjust wheeled. Operate it as shown in the following diagram.

In the actual processing, the user should adjust wheel of pipe wall according to diameter of pipe and equipment. The followings are setting master drawing of different pipe, which can be referred by user.

 


Technical parameter and layout

1. voltage /frequency 

AC 220V/50Hz(other voltage /frequency should be in overload protection.)

2.power 

1.1KW 

3.speed of rotation 

2870U/min;

4.depth of beveling

0~15mm 

5. angle of beveling 

30°~60° 

6.range of groove

≤5mm

7.angle of groove

15°~45°

8.weight

20 Kg

9.size

445×306×255(mm)

Recommend feed speed

material

Recommend speed

General steel structure 850N/m㎡

0.8~1.0m/min

Chilled steel above 850N/m㎡

0.75m/min

Non-rust steel and acid-resisting steel 850N/m㎡

0.5m/min

Cast-steel 450N/m㎡

0.6m/min

Cast-steel 400N/m㎡

0.8~1.0m/min

Aluminum (especial cutter head require)

0.4m/min

List of package

name

amount

name

amount

grooverPQX-15

1set

Stop washerΦ20

1set

Hook head wrench

1set

wrench(30mm)

1set

Inner hexagon spanner 3#4#5#6#8#

Each 1set

 

 

Certificate of qualification and specification sheets

Each 1 pc

 

 

 




top
© Copyright: Shanghai Huawei Welding & Cutting Machine Co., Ltd.. All rights reserved. - Privacy policy | Terms and Conditions

If you have any questions, please send an e-mail inquiry