CG1-30F Right Angle Square Gas cutting Machine

Model Name:
CG1-30F Right Angle Square Gas cutting Machine
Product Description
“CG1-30F” squire cutter is designed according to square or parallel cutting works. It is made up of cross cutting device, longitudinal cutting device, control case, gas distributor and torch. There are reducer casing, motor, and clutch in the cross cutting device. The cross cutting device is equipped on the upper half of the main machine and it walks on the rail by four roller wheel. The four standing bars of roller wheel do left-right parallel moving because gear drives gear rack.

Previous : HK-30 Portable oxygen and acetylene cutting machine

Next : GCD-300 flame cutting Machine for high thickness plate

1. Torch 9. Fast distributor: You only need adjust a time and needn’t to adjust on the next time. 2．Hoses: Connect them between distributor and torch to transfer gas. 3. Cross-adjusting hand wheel: To control torch do cross moving. 10.Hand knob: To move machine 11. Four-way switch: To change the cutting direction and control cutting oxygen. 4.Rail 5. Parallel mobile bar 6.Reducing motor of cross cutting device 12. Clutch knob : “Close” when you turn it on left, “open” when you turn it on right . 7.Stroke dog 8. Thermal baffle: To prevent the heat diffusing into the inner of machine. 13．Universal wheel

PRODUCTS

1.Weight	：24 kilograms
Accessory(parts of guide rail)	：10.5 kilograms
2. Machine dimension	：450mm×800mm×40mm(main machine)；
3. Speed control	：Silicon control
4. Power source	：AC 220V±10％
5. Cutting speed	：50～750㎜/min
6. Cutting thickness	：5-100㎜
7.Groove angle	：0～45°
8.Maximal distance of cross cutting	：A=350MM
9. Maximal distance of longitudinal cutting	：B=1450MM （standard）
10.Maximal angle of cross cutting	：0～45°
11.Tip	：G02(acetylene)or G03(propane)
12.Motor	：1) longitudinal motor 110V 50HZ 30W 3600r/min ：2) cross motor 110V 50HZ 24W 2200r/min

1). Body	1 set
2).Torch unit assemblage	1set
3）Cross cutting device	1set
4）Tip（G02 or G03 1＃，2＃、3＃）	1 pc each
5) Heavy punch(including a heavy punch bar)	1 set
6) Gas-in connector	1 set
7）Wrench	1set
8) Specification sheets and certificate of qualification	1 pc each
9) Power cable	1set
10)M5 inner hexagon spanner	1set
11)Philips screwdriver	1set
12)Needle	1set
13）Leather hose bearer	1set
14）Matrix rail（standare:1800MM）	1set

1. Torch		9. Fast distributor: You only need adjust a time and needn’t to adjust on the next time.
2．Hoses: Connect them between distributor and torch to transfer gas.
3. Cross-adjusting hand wheel: To control torch do cross moving.		10.Hand knob: To move machine
		11. Four-way switch: To change the cutting direction and control cutting oxygen.
4.Rail
5. Parallel mobile bar
6.Reducing motor of cross cutting device		12. Clutch knob : “Close” when you turn it on left, “open” when you turn it on right .
7.Stroke dog
8. Thermal baffle: To prevent the heat diffusing into the inner of machine.
		13．Universal wheel